The classic Butzbach high-speed door that rolls the door skins of both door halves to the side in a fraction of a second. The entire passage height is immediately available. This principle is superior to conventional doors in all aspects: through flexibility in adapting to your requirements, protection against collision damage, maximum reliability and economic efficiency in the long term.
The ECOSPRINT® Mono can be used to create highly frequented passageways, especially in narrow passages or where space is very limited and installation space is at a minimum. Whenever a sliding or swing door would normally be used, the Mono sprint door meets the same requirements without hindrance - only better and faster.
The NOVOSPRINT Syncro is the double-wing, synchronous and side-opening high-speed door. With spring force, both door leaves are opened simultaneously and rolled up in a compact upright profile. The NOVOSPRINT high-speed door reaches an opening speed of up to 5 m/s which is ideal for fast logistic processes, forklift traffic and air locks.
NOVOSPRINT Mono was specially developed as a one-sided rolling high speed door for narrow passages or other very restricted space conditions. The door requires only minimal installation space and is ideal for narrow installation situations and highly frequented aisles. The door enables fast, unhindered and, if required, contact-free passage. In contrast to hinged and sliding doors, our door does not require any space for pivoting or parking areas.
NOVOSPRINT Duo provides two independently controllable door wings in one door opening. They enable the safe separation of vehicle and passenger traffic or, if required, can create a two-lane forklift passage. And whenever you need the entire door width, you can also use both door wings simultaneously. The NOVOSPRINT Duo can be retrofitted to existing buildings at any time and often saves the expensive installation of a separate pedestrian door.
Option ground closure
The NOVOSPRINT ground closure takes care that what should be outside, stays outside. As soon as the door is in the closed position, the door leaves are lowered to the floor so that pests, draughts, dust and noise are kept outside.
Your benefits:
Option crane rail
The lateral opening mechanism is ideal for manufacturing and logistic processes where goods have to be transported via crane rails. A cut-out creates a separation between two rooms without stopping the flow of goods. An activation sensor system opens and closes the high-speed door in perfect harmony with the transported goods.
Your benefits:
Option double-skin
If there are higher requirements for heat and sound insulation, NOVOSPRINT high-speed doors can be equipped with double-skinned door leaves. The air cushion between the skins helps improving both properties.
Your benefits:
Option sprint
The sprint model means your high-speed door opens at record speeds of up to 5 m/s. With an integrated light curtain, you can even maximize the closing speed to 2.5 m/s which is ideal when fast, highly manoeuvrable vehicles are operating in a small space.
Your benefits:
Option hygiene
Whether it is used in the pharmaceutical industry, food industry or healthcare sector – the range of features available means that the NOVOSPRINT is able to fulfil all specific regulations in terms of cleanliness, freedom of pores, food safety and many other hygiene requirements. The lateral movement of the door leaves avoids the contact between door and floor, thus reliably preventing the transport of moisture and dirt when the door is opened.
Your benefits:
NOVOSPRINT high-speed doors can be opened quickly in all situations and thus, according to TÜV SÜD, reliably meet the requirements of the German Social Accident Insurance (DGUV). The door opening by spring force is independent of the power supply and its perfect function is automatically checked every 24 hours.
Your advantages at a glance:
